R16 comes in two parts, mix and fill; that’s it! R17 and R7 are just as simple and only require priming.


Repair downtime for many businesses is frustrating. Our mortar can be ready to use in 60 minutes.


Higher compressive and tensile strength R7 cures to 105 N/mm2.

Facts about Silikal MMA Mortar

  • Low Temperatures

    Usage even at temperatures as low as -10 oC (special grade -25 oC)

  • Impermeable

    Impermeable to liquids

  • Resistant

    Good chemical resistance, weather resistant and excellent wear resistance. Also resistant to de-icing and frost.

  • Shrinkage

    Very low shrinkage.

  • Insulation

    High electrical insulation properties.


Specification Text

The information in our specifications is based on our experience and the best of our knowledge. No liability/warranty by Silikal is associated with the model service specifications. The specifications or individual positions are merely suggestions and do not replace the planning responsibility of architects and structural engineers and may need to be reviewed and adjusted by a knowledgeable planner. Testing and preparation of the substrate according to the data sheets and the technical documentation are the responsibility of the application company.

Any necessary adaptation of the specification to terms of use is the responsibility of the planner or the application company. The described work sequences cannot be applied to every individual construction project.

The degree of skid resistance shall be determined by designer and agreed with the responsible authorities.

Relevant expertise is essential for the processing of methacrylate resins. Minimum requirement is participation in Silikal training.