Silikal Hardening Powder

Description:
Dibenzyl peroxide as starter of the hardening mechanism in Silikal reactive resin systems.


Areas of Application:
Silikal hardening powder is mixed with Silikal reactive resins and sets off a chain reaction and can therefore be regarded as the initiator for a chemical reaction.

Silikal F 10

Description:
Modified methacrylic resin of high elasticity and low temperature flexibility.


Areas of Application:
The high molecular structure and extensibility of Silikal F 10 makes it ideal for filling of concrete joints.

Silikal R I/21

Description:
Quick hardening methacrylic based adhesive.


Areas of Application:
Silikal R I/ 21 was developed specifically for bonding steel to concrete substrates.

Silikal HK 20

Description:
Formulated ready- to- use methacrylic based paste for covings.

Filler:
Silikal Filler CQ
Silikal Filler QS 0.7- 1.2mm


Areas of Application:
Silikal HK 20 coving paste for dry and wet areas.

Special Formulation:
HK 21 for application in warm climates.

Silikal RE 584

Description:
EP cleaner

Silikal RH 65

Description:
Low- viscous and reactive methacrylic resin for filler- rich indoor screed of 5 -20 mm thickness on concrete.

Filler:
Silikal Filler 65


Areas of Application:
Silikal RH 65 resin is used for indoor screeds of 5 – 20 mm on concrete to equalize an uneven concrete surface.

Silikal Tex

Description:
A high performance polyester fabric, which has high strength and good elongation behavior.

Sizes:
Tex 1000 100cm
Tex 500 50cm
Tex 200 20cm


Areas of Application:
Silikal Tex is used as a reinforcing fabric for coating or sealing with Silikal MMA resins.

Silikal Simflex 300

Description:
Thixotropic, waterproof and flexible liquid plastic for sealing horizontal and vertical surfaces.

Standard Colour:
grey


Areas of Application:
Silikal Simflex 300 is a sealant, which is always to be applied on the side of the building facing the water.

Silikal Additive ZA

Description:
Low temperature accelerator.


Areas of Application:
Silikal Additive ZA supports the low temperature hardening of methacrylic based Silikal resins in combination with dibenzyl peroxide as hardener in the temperature range of +5° C to -25° C.