Description:
Dibenzyl peroxide as starter of the hardening mechanism in Silikal reactive resin systems.
Areas of Application:
SILIKAL® Hardening Powder is mixed with Silikal reactive resins and sets off a chain reaction and can therefore be regarded as the initiator for a chemical reaction.
Description:
Formulated ready- to- use methacrylic based paste for covings.
Filler:
SILIKAL® Filler CQ
SILIKAL® Filler QS 0.7- 1.2mm
Areas of Application:
SILIKAL® HK 21 coving paste for dry and wet areas.
Description:
High- grade, pigmented, solvent-free PUR coating system
Description:
EP structural coating for walls and floors.
Description:
EP self- levelling mortar
Description:
EP top coat, clear
Description:
Medium- viscous and solvent- free methacrylic resin offering high hardness and low yellowing.
Areas of Application:
SILIKAL® R 72 resin is used as colourless, highly wear resistant top coat for decorative smooth coatings on coloured flakes and coloured sand and as a pigmented top coat with enhanced properties.
Description:
Low- viscous, reactive, solvent- free and almost non- yellowing methacrylic resin offering high hardness and good resistance to chemicals.
Areas of Application:
SILIKAL® R 71 is employed primarily as a colourless , scratch- resistant top coat for decorative coloured flakes and coloured sand surfaces.
Description:
Low- viscous and reactive methacrylic resin for filler- rich indoor screed of 5 -20 mm thickness on concrete.
Filler:
Silikal Filler 65
Areas of Application:
Silikal RH 65 resin is used for indoor screeds of 5 – 20 mm on concrete to equalize an uneven concrete surface.
Description:
Medium- viscous methacrylic resin being used as a decor flooring system on top of unicoloured Silikal self- levelling coatings.
Filler:
SILIKAL® Filler CL
Areas of Application:
SILIKAL® R 69 C is used as a binder for manufacturing decor floors. A mixture of SILIKAL® R 69 C and SILIKAL® Filler CL is applied on top of the already prepared, unicoloured self- levelling coat based on SILIKAL® R 63 resin (alternatively R 62 resin). The recommended base colour of the flooring should match approx. RAL 7023 or RAL 7030. SILIKAL® R 69 C resin is applied in thickness 1 to 1.5 mm).